|
|
Our Products
|
|
Tools and Accessories |
|||||||||||||||||||||
|
|
|||||||||||||||||||||
|
Fibre
Inspection Microscope Hand-held
termination inspection tool that will provide years of service,
true optical performance, and laser safety. Their design
incorporates a white LED for illumination which provides 100,000
hours of lamp life and extends battery life up to 30 hours of
continuous use. Magnification 200 x. |
|
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
Simplex Fibre Cable 20.040.1882 Simplex Cable 50/125 ΅m multimode optical fibre (100 m). Non metallic strain relief (Aramid) Cable sheath fire retardant, colour: orange Transport and storage: 25° C up to +70° C Installation: 5° C up to +50° C In use: 5° C up to +70° C Outer diameter: 2,8 mm Weight: 9 kg/km min. Bending radius: 30 mm max. tensile force: 400 N |
|
||||||||||||||||||||
|
Multi Core Optical Fibre Cable Cable core loose tube, gel filled. Armouring multi-functional E-glass yarn, water-absorbent as strain relief elements and as rodent protection. Cable jacket PE-jacket, colour: black with imprint Transport and storage: -25Ί C to + 70Ί C Installation: + 5Ί C to + 50Ί C In use: -20Ί C to + 60Ί C minimum bending radius: 15 x outside diameter maximum pull force: 1200 N Multi Core Optical Fibre Cable:
|
|
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
Precision Fibre Cleaver 20.040.1830 For professional cutting of optical fibre a cleaver is required to provide perpendicular cuts. Furthermore the surface quality of the cut fibre must be perfect especially when fibres are spliced. |
|
||||||||||||||||||||
|
Buffer Cladding Stripper (Miller Pliers) 20.040.1838 Before optical fibres are treated like cutting splicing etc. the protective plastic coating needs to be removed. This is done by the so called Miller Pliers. |
|
||||||||||||||||||||
|
Fibre Connector Polishing Machine for ST Connectors 20.040.1852 This unit is recommended for reliable and reproducible polishing results. Two connectors can be polished simultaneously and the polishing time can be set for optimum results. The lapping film is simply attached to the rotating polishing pad. The movement of the polishing arm guarantees scratch free and homogeneous polished surfaces. |
|
||||||||||||||||||||
|
Set of 10 spare Lapping Films 20.040.1854 |
No illustration |
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
Single Fibre Fusion Splicer 20.040.1832 Applicable Fibres : SM(Singlemode) GI(Graded Index) DS(Dispersion Shifted) Applicable Fibre Coating Diameters : 250 and/or 900 microns No. of Fibres to be spliced: Single fibre to single fibre Splice Loss: 0.05 dB typical with SM fibre 0.03 dB typical with GI fiber 0.08 dB typical with DS fibre when fibre cleave angles are less than or equal to one degree Return Loss: > > 60 dB Cleaved Fibre Length: 8 to 16 mm Viewing Angle: Both X and Y axes simultaneously Magnification of Fibre: 110X Viewing Method: CCD camera and 5 LCD monitor No. of Splicing Programs: 30 including 3 factory settings Splice Result Storage: Last 300 splices Altitude Compensation: 0 to 3500 meters above sea level Mechanical Proof Test: 2N Applicable Splice Protector: 60 mm and 40 mm length heat- shrinkable splice protector Dimensions W, D, H: 150, 150, 150 mm (without Monitor) Splice Time: Typical 25 sec. Splice protector 40 mm, set of 10 20.040.1834 |
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||
